28
2. To answer the intercom call on the
destination handset, press TALK or
. The cordless handset displays
Intercom.
-OR-
To answer the intercom call on the
telephone base, lift the corded
handset or press .
3. To end the intercom call, press OFF
or place the handset back in the
charger. The cordless handset displays
Intercom ended.
-OR-
To end the intercom call on the
telephone base, press or place the
corded handset back in the telephone
base.
• To cancel the intercom call before it is
answered, press OFF.
• Press OFF or MUTE on the cordless handset
to temporarily silence the intercom ringer.
• If the destination device is not powered,
out of range, on a call, or does not answer
the intercom call within 100 seconds, your
handset displays No answer. Try again. and
then returns to idle mode.
• Only one intercom call can be established at
a time.
Make intercom call using the
telephone base:
1. Press PAGE/INTERCOM. The
telephone base make intercom call to
all system devices.
2. To answer the intercom call on the
destination handset, press TALK or
. The cordless handset displays
Intercom.
3. To end the intercom call, press or
place the corded handset back in the
telephone base.
• To cancel the intercom call before it is
answered, press PAGE/INTERCOM.
Answer an incoming call during an
intercom call
When you receive an outside call during
an intercom call, there is an alert tone.
• To answer the outside call, press TALK.
The intercom call ends automatically.
• To end the intercom call without
answering the outside call, press OFF.
The telephone continues to ring.
Call transfer using intercom
Use the intercom feature to transfer an
outside call from the cordless handset to
the telephone base. You can also share an
outside call with the telephone base.
1. During a call with the cordless handset,
press MENU. Then, press SELECT to
select Intercom.
• If you have no additional
expansion handset or photo
speed dial handset, the cordless
handset displays Calling base. The
telephone base rings.
• If you have other registered
handsets,
the cordless handset
displays INTERCOM TO:. Press q or
p to choose a desired device and
then press SELECT.
You may also enter a destination
handset number (1-4), or press 0
for the telephone base, or press
TONE
*
for all devices.
The destination device rings. If you
have two or more cordless handsets,
the destination handset displays
HANDSET X is calling or HANDSET X is
calling all.
To Next Page
Loading...
Need help?
General
