VTech SN5147 User Manual

34
Call categories
Calls are classified into four categories.
Smart call blocker handles the calls in the
following ways:
Call category Call control
Welcome calls
Numbers
saved in allow
list.
Numbers
saved in
phonebook.
Numbers not
found in block
list.
Names saved
in star name
list.
Allow
The telephone rings when
there is an incoming call
with number saved in your
allow list or phonebook,
but not in your block list.
Robocalls with caller names
saved in your star name list
will also ring.
Unwelcome
calls
Numbers
saved in block
list.
Block
The telephone does not
ring when there is an
incoming call with number
saved in your block list, and
the call will be rejected.
Call category Call control
Calls without
numbers
Numbers that
are “out of
area” or set to
“Private“.
Uncategorized
calls
With absent
caller ID
number.
Numbers
not found in
phonebook.
Numbers not
found in allow
list.
Numbers not
found in block
list.
Caller ID
names not
found in star
name list.
Option 1: Screening with
caller name
If you have selected this
option, the telephone
plays the screening
announcement, and then
asks the caller to say his/her
name before the call rings
on your telephone. You
will then hear the caller’s
name announced if you
have turned on the caller
ID announce feature. Then,
you can decide whether to
accept or reject the call, or
to forward the call to the
answering system.
Option 2: Screening
without caller name
If you have selected this
option, the telephone
plays the screening
announcement, and then
asks the caller to press
the pound key (#) before
the call rings on your
telephone. You can then
answer the call.
Option 3: Allow (default
settings)
The telephone allows the
calls to get through and
ring. The caller’s number
will not be saved to the
allow list.
Option 4: Answering
system
If you have selected this
option, the telephone
forwards the calls to the
answering system without
ringing.
Option 5: Block
If you have selected this
option, the telephone
rejects the calls with block
announcement without
ringing. The caller’s
number will not be saved
to the block list.

VTech SN5147 Specifications

General

Color	white
Speakerphone	yes
Expandable	yes
Paging Locator	yes
Volume Control	yes
Intercom	yes
Incoming Lines	1
Visual Ring Indication	yes
Dialing Mode	pulse, tone
Record Time	22 minutes
Display Type	lcd
Message Counter	yes
New Message Indicator	yes
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	yes
Redial Function	yes
Conference Call	yes
Conference Call Capability	yes
Mute	yes
Hold Button	no
Speed Dial Memory	yes
Caller ID Memory	50 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	1, 4
Backlit Keypad	yes
Keypad Location	handset
Bluetooth	no
Remote Access	yes
Frequency	1.9ghz