How to put in the batteries
The Type-right uses 4 "C" size batteries. To install the batteries or
change them, follow these simple steps:
1)
Locate the battery case cover on the bottom of the
Type-right
unit.
2)
Remove the cover.
3)
Insert 4 "C" size batteries as illustrated.
4)
Replace the battery case cover.
5)
Press the ON/OFF key to begin working with the
Type-right.
r
ar2
C=1771CD
0
Battery saving auto shut-off
If your
Type-right
is turned on, but is not used for about 10 minutes,
it will automatically shut off to preserve your battery power. This is
very good for your batteries.
But remember, when it does this, all
memory will be wiped out and you will have to start again from
the beginning. So don't expect the second half of your lesson to be
waiting for you when you turn the
Type-right
on again.
4
To Next Page
Loading...
Need help?
General