VTech vt 1030 - V-tech Microphone Unidirectional User Manual

Base settings
Change PIN code
Your System PIN can help prevent unauthorised users from
changing the settings on your phone.
1. Press the Left soft key
to open the main menu.
2. Press or until the display shows
BS SETTINGS
and press OK .
3. Press or until
CHANGE PIN is displayed, press OK to
select.
ENTER PIN? is displayed.
4. Enter the existing PIN code using the keypad and press
OK .
NEW PIN? is displayed.
5. Enter a new 4 digit PIN code using the keypad and press
OK .
CONFIRM? is displayed.
6. Re-enter the new PIN code and press
OK . You hear a
confirmation tone.
7. Press and hold
to return to standby.
Dial mode
Your VT1030 is pre-set to tone dialling (DTMF).
You can set the dial mode to pulse dialling if your
switchboard requires.
1. Press the Left soft key
to open the main menu.
The default PIN setting is 0000.
Tone is the default setting.
You should only have
to change this if connected to
a switchboard that requires
Pulse dialling.
30

VTech vt 1030 - V-tech Microphone Unidirectional Specifications

General

Brand	VTech
Model	vt 1030 - V-tech Microphone Unidirectional
Category	Cordless Telephone
Language	English