Set the day and time
1. Press the Left soft key
to open the main menu.
2. Press or until the display shows
HS SETTINGS
and
press the
OK
soft key.
DATE & TIME
is displayed, press the
OK
soft key again.
3. Press or until the display shows
SET TIME
and press
the
OK
soft key.
4. The current time setting is displayed, enter 2 digits for the hour
and 2 digits for the minuteusing the 24hr format (eg for 10.54pm,
press ) and press the
OK
soft key, you will
hear a confirmation tone.
5. Press and
SET DATE
is displayed.
Press the
OK
soft key.
6. The current date setting is displayed, enter 2 digits for the day,
2 digits for the month and 2 digits for the year using the dd-mm-yy
format (eg for 23rd May 2008 press
) and press the
OK
soft key, you will hear a
confirmation tone
7. Press and hold the
soft key to return to standby.
Your VT1030 is now ready for use.
Getting started
4
To Next Page
Need help?
General
