VU LED32D6545 - 9. Picture Setting; Picture Menu Options

18
PICTURE
Move Menu Enter Exit
Pict ure Mode Standard
Color Temperat ure Medium
Noise Reduction Middle
Cont rast 50
Brightness 50
Color 50
Tint 50
Sharpness 50
PICTURE
Move Menu Enter Exit
OK
Item Function Operation Range
Picture menu
Press MENU on the remote control to display the main Menu.
1. Press◄ or ►to select PICTURE.
2. Press▲ or ▼to highlight an item, press OK button to enter submenu.
Picture Setting
9
Picture mode Select your viewing preference from 4 options.
Press▲ or
▼to highlight
an item, press
OK or ◄►
button to enter
submenu.
• Dynamic
• User
• Standard
• Mild
Contrast Set contrast intensity. 0-100
Brightness Set overall brightness. 0-100
Color Set color intensity. 0-100
Tint
Adjust colors toward green or red tint.
Note: Tint is available to be adjusted only when
the system of the video signal is NTSC.
0-100
Sharpness Adjust the picture clarity. 0-100
Color
Temperature
Cycle among color temperture display modes:Cool/
Warm/Mediom.
Noise
Reduction
Select to reduce the noise level of connected
equipment:Off/Low/Middle/High.