Vuzix M300 - Page 18

Page | 18 Part number 446PB0005-01
To trigger the listener:
 Say the “Hello Vuzix” keyword clearly.
The name “Vuzix” is pronounced [view-zicks]. It is important to correctly
pronounce “Vuzix” in order to reliably trigger the listener.
The standard voice commands are globally accessible on the M300 when Speech
Recognition is enabled and the listener is triggered. Once triggered, voice
navigation will listen for commands for 10 seconds before timing out. Speaking
additional voice commands will reset the listener timeout.
In addition to enabling the Speech Recognition option, the Speech Recognition
settings also provide adjustments for the recognition level, sensitivity, and the
listening recognizer's timeout.
Recognizer Level adjusts microphone gain, Recognizer Sensitivity adjusts the
degree of accuracy required by the recognizer when listening for a phrase, and
Recognizer Timeout allows adjustment of how long the recognizer will listen for
commands after the keyword or the last voice command is issued.
By default, the timeout is 10 seconds. Setting the timeout slider to the maximum
value will set the timeout to an unlimited value. It is important to keep in mind
that continuous listening will increase battery usage.
Voice Command
Function
hello vuzix
Activates the listener and will wake the
M300 from sleep mode
voice off
Disables the listener when timeout is set to
an unlimited value
cancel
Triggers the Escape action
go home
Returns to the launcher
go forward
move forward
Navigates forward (recorded in history
stack)
go back
move back
Navigate one step backwards through the
history stack
go up
move up
scroll up
Basic directional navigation – moves
selection up
go down
move down
scroll down
Basic directional navigation – moves
selection down
go left
move left
scroll lef
t
Basic directional navigation – moves
selection left
