VWR Rotary Vane Pump ver 1.3 23.11.2020
6.0 Symbols and conventions
These units conform to the SI International system of units of measurement. The following symbols (with
recommendation of IEC1010) of warning will be found on the pump and/or in this manual.
This symbol alerts you to a wide range of potential dangers. Hazard
which may lead to serious injuries or material damage.
This symbol advises danger from electricity or electric shock.
This symbol indicates that a hot surface may be present. Hot surface
can lead to serious injuries or material damage.
This symbol marks information that is particularly important.
Read all instructions pertaining to safety, set-up, operation, and maintenance. Proper operation is the user’s
responsibility.
7.0 Technical Specification
7.10 Intake pressure / Pumping speed – Diagram
Fig. 4: Intake Pressure / Pumping Speed – Diagram VWR RV2.5+/RV3+/RV6+/RV8+/RV18+
To Next Page
Loading...