VWR RV2.5+ - Oil Mist Filter 10;16 Exhaust; Oil - Technical Data

VWR Rotary Vane Pump ver 1.3 23.11.2020
12.40 Oil Mist Filter 10/16 Exhaust
Technical Data
Parameter
Data
Connecting flange
(suction/pressure)
DN 16 KF
Max. filling volume
270 ml
Seals
FKM
Filter cartridge
Glass fibre
Transparent housing
for optimal control of the filter
cartridge
Order no.
Oil Mist Filter 10/16 Exhaust
181-7007
Area of
Application
The Oil Mist Filter 10/16 Exhaust in compact design effectively
reduces at intake pressures to 50 mbar the oil mist emission from the
rotary vane pump's pressure port. Mounting always in a vertical
position.
Maintenance
Maintenance of the Oil Mist Filter 10/16 Exhaust is limited to
changing the saturated filter cartridge.
Assembly –Oil
Mist Filter 10/16
Exhaust at
Rotary Vane
Pump
The Oil Mist Filter 10/16 Exhaust is flanged directly to the pressure port
of the vane-type rotary pump, using a normal clamping ring and a
centering ring with an O-Ring. (connecting elements in DN 16 KF - see
data for ordering – 8.30 Oil Mist Separator Exhaust)
12.50 Oil – Technical Data
VWR RV+ Oil is a triple-distilled hydrocarbon oil using severely hydrotreated base stock. The oil is designed
to resist breakdown at higher RPMs and operating temperatures of direct-drive vacuum pumps. The
hydrotreating virtually eliminates aromatics and sulfur to give good resistance to sludge and varnish
formation over time in corrosive environments. VWR RV+ Oil enables VWR RV+ direct-drive vacuum pumps
to maintain the highest vacuum performance over time. The oil is light yellow.
CAS No.
64742-65-0
Vapor Pressure (at 25°C)
1×10
-6
mbar (1×10
-6
torr)
Viscosity (at 40°C)
65 cSt (305 SUS)
Specific Gravity
0.87
CAUTION!
The technical data and operating characteristics of rotary vane pumps are only
guaranteed if original oils are used!