VWR RV2.5+ - Product Standards, Safety Regulations

VWR Rotary Vane Pump ver 1.3 23.11.2020
1.60 Product Standards, Safety Regulations
The rotary vane pumps VWR RV2.5+, VWR RV3+, VWR RV6+, VWR RV8+, VWR RV18+ conforms to the:
2006 / 42 / EC
Directive on machinery
2012 / 19 / EU
Directive on waste electrical and electronic equipment
2011 / 65 / EU
Directive on the restriction of the use of certain hazardous substances in electrical
and electronic equipment
2014 / 30 / EU
Directive on electromagnetic compatibility
The CE mark is located on the rating plate. Observe the binding national and local regulations when fitting
the pump into installations.
The rotary vane pumps VWR RV2.5, VWR RV3+, VWR RV6+, VWR RV8+, VWR RV18+ meets the
following product standards:
EN 60204-1
Safety of machinery - Electrical equipment of machines –
Part 1: General requirements
EN 1012-2
Compressors and vacuum pumps-Safety requirements-Part 2: Vacuum pumps
EN 61000-6-1
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for
residential, commercial and light-industrial environments
EN 61000-6-3
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission
standard for residential, commercial and light-industrial environments
EN 61000-3-2
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic
current emissions (equipment input current up to and including 16 A per phase)
EN 61000-3-3
Electromagnetic compatibility (EMC) - Part 3: Limit - Section 3: Limits for voltage
fluctuations and flicker for equipment with rated current £ 16 A
Observe the standards and regulations applying in your country when you use the rotary vane pump.