VWR RV2.5+ - Oil Mist Separator Exhaust

VWR Rotary Vane Pump ver 1.3 23.11.2020
12.30 Oil Mist Separator Exhaust
Technical Data
Parameter
Data
Connecting flange
DN 16 KF
Oil mist separator – basic body
Aluminium
Collector vessel
Borosilicate glass
Seals
FKM
Max. filling volume
270 ml
Filter cartridge
Optical fibre
Order no.
Oil Mist Separator
Exhaust
181-7002
Area of
Application
The Oil Mist Separator Exhaust effectively reduces the oil mist
emission from the rotary vane pump's pressure port at high intake
pressures. The horizontal arrangement of the separator alongside the
pump prevents fluids running back from the collector or condensate
vessel into the pump.
Maintenance
Maintenance of the Oil Mist Separator Exhaust is limited to simply
emptying the collecting vessel and changing the saturated filter cartridge.
Assembly –Oil
Mist Separator
Exhaust at
Rotary Vane
Pump
The Oil Mist Separator Exhaust
(H) is flanged directly to the
pressure port (C) of the vane-
type rotary pump (A), using a
normal clamping ring (D) and
a centering ring with an O-ring
(E).
(connecting elements in DN 16
KF- see data for ordering below)
Connecting elements DN 16 KF:
for
Designation
Order no.
- Condenser Inlet
- Oil Mist Separator Exhaust
- Oil Mist Filter 10/16 Exhaust
KF Normal Clamping Ring Aluminium
DN 10/16
181-0544
- Oil Mist Separator Exhaust
- Oil Mist Filter 10/16 Exhaust
KF Centering Ring Aluminium
with FKM-O-Ring DN 16
181-0546
- Condenser Inlet
KF Centering Ring with Fine filter
Stainless steel
with FKM-O-Ring DN 16
181-0622