Inserting a plastic bobbin in the hook race
What do I do with the lower thread?
63
Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR
4. Proceed by holding the ‹plastic bobbin› with the index finger of the right
hand and guide the thread slowly to the left into the 2nd slot of the hook
race (9 o’clock position)
! The thread again slides audibly between the tension springs of the
2nd Slot (9 o’clock position)
5. Pull the thread up to the end of the thread cutter. It is cut there automat-
ically.
» The plastic bobbin has been inserted
W6 Tip
Moreover, W6 WERTARBEIT offers the following options on its website for
free.
Help / W6 N 2000 Exklusive / Videos
: Optimal Threading (approx-
imately 4 minutes’ duration)
To Next Page
Loading...
