Utility stitches
Using a Pattern
99
Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR
Prerequisite:
• You have read the safety notes for this sewing machine, see “Safety
Notes” (page 7).
• You have set up the machine in a safe place; see “Setting Up” (page 12).
• You have connected the machine properly, see “Connecting the ma-
chine” (page 12).
• Please take a look on our website www.w6-wertarbeit.com
and selct the Video "Critical for optimal threading of a
W6 N2000 Exklusive".
• Use a W6 Super-Stretch Needle 90 (HAx 1SP) for stretch and non-
stretch fabrics, or a W6 Super-Stretch Needle 75 (HAx 1SP) for thinner
fabrics. If necessary, install a special needle.
• You are using W6 plastic bobbins and thread tension-friendly / lint-free
W6 thread.
• The presser foot that matches the pattern is installed.
W6 Tip
Take note:
It must be ensured that the thread take-up lever, covered by the head
cover, and the needle are in a particular position before threading and any
program change.
In order to fulfil this requirement, press the “Needle Up - Needle Down”
button twice. The thread take-up lever and the are needle moved
automatically to the correct starting position.
• Failure to do so will always lead to a sloppy seam, blockages or damage
to the sewing machine. In the event of any lack of clarity, further informa-
tion can be found at the VIDEO menu item at www.w6-wertarbeit.eu: Cri-
teria for optimal threading.
The lower thread has been pulled tightly and carefully to the 7 and 9 o’clock
positions in the silver slot of the black hook race. When pulling it in, you will
hear a definite clicking at the 7 and 9 o’clock positions. Lower thread
tension is active. You have performed a tension test.
• Failure to do so will always lead to a sloppy seam, blockages or
damage to the sewing machine. In the event of any lack of clarity,
further information can be found at the VIDEO menu item at www.w6-
wertarbeit.eu: Criteria for optimal threading.
Press the Needle Up - Needle Down button twice
To Next Page
Loading...
