BA 1001/1501/2001 us – Edition 3.3 * * 12001b540.fm 5-39
Maintenance
Maintenance
5.16 Maintenance plan 2001 (overview)
Work description
For servicing and maintenance on the attachment, please refer to the operation and maintenance manual of
the attachment manufacturer as well.
Maintenance plan/operating hours (o/h)
Maintenance
(once a day)
Every 50 o/h
Every 250 o/h
Every 500 o/h
Once a year or
after 1000 o/h
After 1500 o/h
Customer
Wacker Neuson
service center
Fluid and filter changes ( ):
Perform the following oil and filter changes (check oil levels after test run):
• Engine oil
1
●● ●
• Engine oil filter
2
●● ●
• Fuel filter
3
●● ●
• Air filter element ●●
•Coolant ●●
• Hydraulic oil filter insert
4
●● ●
• Hydraulic oil ●●
• Hydraulic oil reservoir breather ●●
Inspection work ( ):
Check the following material. Refill if necessary:
• Engine oil ●●
• Engine coolant ●●
• Hydraulic oil ●●
Clean the water ducts
5
●●
Check radiator for engine and hydraulic oil for dirt. Clean if necessary
●●
Check cooling systems, heating and hoses for leaks and pressure (visual check)
●●
Air filter (damage)
●●
Check the air filter, clean if necessary
●●
Prefilter with water separator: drain water
●●
•Clean ●●
Check V-belt condition and tension
●●
1. Drain engine oil the first time after 50 o/h, then every 250 o/h
2. Replace the engine oil filter the first time after 50 o/h, then every 250 o/h
3. Replace the fuel filter the first time after 50 o/h, then every 250 o/h
4. Replace the hydraulic oil filter insert the first time after 50 o/h, then every 500 o/h
5. Clean the water ducts every other 1000 o/h servicing
To Next Page
Loading...
Need help?
General
