5-40 BA 1001/1501/2001 us – Edition 3.3 * * 12001b540.fm
Maintenance
Check V-belt condition and tension
●●
Replace the V-belt
●●
Check the exhaust system for damage and condition
●●
Check valve clearance, adjust if necessary
●●
Fuel injection pump
●●
Injection and pressure
●●
Check injection nozzles and valves
1
●●
Empty diesel fuel tank
●●
Check battery electrolyte. Add distilled water if necessary
●● ●
Tire check (damage, air pressure, tread depth)
●●
Wheel nuts
●●
Check alternator, starter and electric connections, bearing play and function
●●
Preheating system, electric connections
●●
Pressure check of primary pressure limiting valves
2
●● ●
Check piston rods for damage
●●
Check screws for tightness
2
●● ●
Pin lock
●●
Line fixtures
●●
Check indicator lights for correct function
●● ●
Insulating mats in engine compartment
●● ●
Cleanliness of access
●●
Adhesive labels and Operator’s Manual
●● ●
Engine cover gas strut
●●
5.16 Maintenance plan 2001 (overview)
Work description
For servicing and maintenance on the attachment, please refer to the operation and maintenance manual of
the attachment manufacturer as well.
Maintenance plan/operating hours (o/h)
Maintenance
(once a day)
Every 50 o/h
Every 250 o/h
Every 500 o/h
Once a year or
after 1000 o/h
After 1500 o/h
Customer
Wacker Neuson
service center
To Next Page
Loading...
