Commissioning
7.1 Safety instructions for operation
7 Commissioning
7.1 Safety instructions for operation
WARNING
Tipping hazard due to slipping or overturning machine!
At least 2/3 of the machine must be on a stable surface near edges.
► Take the machine out of operation and lift it back onto a stable sur-
face.
WARNING
Improper handling may result in injury or serious material damage.
► Please read and follow all safety instructions in this operator's man-
ual.
WARNING
Risk of hearing damage if the country-specific noise limit is
exceeded!
Working with the machine without hearing protection can lead to hearing
damage in the long-term.
► Wear ear protectors.
► Work attentively and cautiously when using hearing protection.
CAUTION
Health hazard due to vibrations!
Physical impairments due to vibration.
► Take regular breaks.
CAUTION
Risk of collapse and spillage!
There is a risk of injury from falling or spilling when working on fracture,
pit, dump and embankment edges, on trench edges and heels.
► Pay attention to side walls and their stability.
► Ensure stability.
Operation on inclined surfaces
NOTICE
Technical damage due to failure of engine lubrication!
► Do not exceed the maximum permissible inclination, see see Tech-
nical Data on page 48.
• Only approach gradients from below.
32 Operator’s Manual | BPS1030B, BPS1135B, BPS1340B, BPS1550B, BPS2050B | BPS | 5100066824 | 04/2023 |
Version: 5 | [en-US]
To Next Page
Loading...
Need help?
General
