Maintenance
9.1 Safety instructions for maintenance
WARNING
Risk of injury due to missing or non-functioning safety de-
vices!
► Only operate the machine if the safety devices are correctly in-
stalled and functioning.
► Do not change or remove safety devices.
CAUTION
Danger of burns due to hot surfaces!
The machine, engine and exhaust can heat up quickly after a short time;
that can lead to severe burns in case of contact with skin.
► Always allow the machine, engine and exhaust to cool down after
use.
► Use heat-resistant protective gloves if the cooling phase cannot be
maintained (e.g. due to an emergency).
CAUTION
Health risk from fuel, lubricants and coolants!
► Do not inhale vapors.
► Avoid skin and eye contact.
NOTICE
Engine damage from operating the engine without an air fil-
ter!
If the engine is operated without an air filter, there is a risk of rapid en-
gine wear.
► Do not operate the engine without an air filter or air filter cover.
Environment
Soil contamination due to oil leaking or overflowing.
► Line work surface with impermeable foil.
► Use collecting container for used oil.
► Dispose of used oil in an environmentally friendly manner in accor-
dance with statutory regulations.
Environment
Avoid damage to the environment!
► Clean the machine in a suitable place where the dirty waste water
can be collected in an environmentally friendly manner.
► Collect contaminated water and dispose of it in an environmentally
friendly manner.
38 Operator’s Manual | BPS1030B, BPS1135B, BPS1340B, BPS1550B, BPS2050B | BPS | 5100066824 | 04/2023 |
Version: 5 | [en-US]
To Next Page
Loading...
Need help?
General
