Wacker Neuson CRT 36-25 User Manual

wc_tx000640gb.fm
32
Maintenance CRT 36
4.5 Control Arm Adjustment (Forward or Backward)
The control arms should line up evenly. If arms appear out of adjustment, they can
be re-adjusted forward or backward as follows:
1. Loosen jam nuts (b).
2. Turn the vertical linkage (a) as follows:
 Extend the linkage to adjust control levers forward. See section 4.5 before
extending linkage.
 Shorten the linkage to adjust control levers backward.
3. After the arms have been adjusted to the desired position, tighten jam nuts (b).
NOTICE: Control arms are adjusted as part of the steering assist system.
Changing orientation of the control arms may affect steering effort.

Wacker Neuson CRT 36-25 Specifications

General

Brand	Wacker Neuson
Model	CRT 36-25
Category	Trowels
Language	English