Wacker Neuson DPU 25 Series - Decomissioning; Only for Machine Types with Electronic Starter; Devices with Pull Rod (Auxiliary Equipment)

10 Use and operation
28 100_0202_op_0006.fm
10.4 Decomissioning
Turning off the engine
1. Put the throttle lever into the idle position.
2. Press the OFF switch.
10.4.1 Only for machine types with electronic starter::
3. Turn key to position 0.
4. Remove key if necessary.
Note: To prevent battery discharge, always remove the key or turn it to position 0.
10.4.2 Devices with pull rod (auxiliary equipment):
Press speed control using the pull rod for so long till the engine has shut down.
Item Designation
1 Off switch
Item Designation
2 Ignition lock
Item
Designation
3 Pull rod
1
2