10 Maintenance
34 100_0202_mt_0008.fm
10.1 Maintenance table
Maintenance jobs Daily h/year Weekly Monthly
Clean the machine
Visual inspection for completeness
Visual inspection for damage
Check the engine oil level*
Replace the engine oil* 25 h/250 h
Replace the engine oil filter* 25 h/250 h
Clean, set, repair, replace the injection nozzles* 1500 hours
Clean, set, repair the injection valve* 3000 hours
Replace the fuel filter* 500 hours
Check water trap*
Check the intake area of the combustion air*
Check air cleaner service indicator*
Cleaning, replacing the air cleaner cartridge* 500 hours
Check the tapped clearance** 25 h/250 h
Check the exciter oil level
Replace the exciter oil 250 h/1/2
year
Check hydraulic oil level**
Check hydraulic hose lines** 125 hours
Check / replace the V-belt
Check the rubber buffer** 125 hours
Check the to ensure the screwed connections are firmly
seated
Re-lubricate the threaded spindle and ratchet pin
Clean cooling fins.*** 250 h
*
Note the engine operator's manual.
**
Have this work performed by the service department of your Wacker Neuson contact partner.
**
Yanmar.
To Next Page
Loading...
Need help?
General
