5-56 BA E19 en* 1.0 * E19_10_510.fm
5 Operation
If a hose bursts, move the control lever or stabilizer blade lever to neutral.
Safe load indicator
Proceed as follows after a damage:
1. Stop the vehicle immediately.
2. Stop the engine.
3. Move the control lever or stabilizer blade lever to neutral.
4. Perform emergency lowering if possible – see chapter “5.11
Emergency lowering” on page 5-70
5. Raise the control lever base.
6. Remove the starting key and lock the cabin.
7. Secure the vehicle and the attachment.
8. Contact a Wacker Neuson service center and have the malfunction
rectified.
Use a suitable container to collect fluids and lubricants as they flow out
and dispose of them in an environmentally friendly manner.
Position Safeguard
Boom Hose burst valve
Shovel arm Hose burst valve
Stabilizer blade Counterbalance valve
To Next Page
Loading...
