BA E19 en* 1.0 * E19_10_900.fm 9-9
Technical data 9
9.13 Weights
Weight indications can vary by +/- 2%.
Determining the loading weight
The basis for calculating the loading weight is the shipping weight
indicated on the vehicle nameplate. Add subsequently installed options
and attachments (e.g. bucket, Easy Lock, breaker console) to the shipping
weight. Add fuel depending on the tank capacity
.
The given weights are exemplary. In order to determine the actual weight,
the vehicle must be weighed before transportation.
Base vehicle
(short stick, canopy, mono boom, rubber track)
ET42
kg (lbs)
EZ50
kg (lbs)
Transport weight
1
1. Base vehicle + 25% fuel tank capacity
3817 (8415) 4617 (10,179)
Operating weight
2
2. Base vehicle + full fuel tank capacity + bucket 600 mm (24 in) + operator (75 kg/165 lbs)
4032 (8889) 4847 (10,686)
Option
1
1. The weight indications for options exclusively refer to Wacker Neuson original accessories.
kg (lbs)
Swiveling dozer blade EZ50 216 (476)
Extra weight 200 (441)
Swiveling dozer blade ET42 111 (245)
Cab 100 (220)
Steel track ET42 100 (220)
Steel track EZ50 54 (119)
Front Guard 33 (73)
Air-conditioning system 25 (55)
Long stick 14 (31)
Safe load indicator 14 (31)
Fuel-filling pump 11 (24)
3rd control circuit with proportional controls 11 (24)
Heating 10 (22)
Powertilt preparation 10 (22)
Quickhitch-ready 13 (29)
Shatter protection 8 (18)
Full fuel tank 66 (146)
Attachment – see "Technical data of the attachments" on page 9-11
To Next Page
Loading...
