BA E19 en* 1.0 * E19_10_700.fm 7-23
Maintenance 7
Damage to rubber and electrical parts when cleaning with solvents.
Do not use solvents, benzine, or other aggressive chemicals.
Damage to electrical and electronic components from water jet.
► Electronic components (e.g. relays, displays) should not be cleaned
with a high-pressure cleaner.
► Electric components (e.g. headlight, rotating beacons) must be at a
distance of at least 50cm (20 in) from the jet of the high-pressure
cleaner.
► If water contacts electrical components, dry them with compressed air
and apply contact spray to them.
In order to avoid damage to the environment, clean the vehicle only in
wash bays and places authorized by the authorities.
To Next Page
Loading...
