BA E19 en* 1.0 * E19_10_710.fm 7-55
Maintenance 7
Measures for increasing intervals between regeneration
• Bring engine up to operating temperature.
• Avoid operation under low-load conditions.
• As soon as the indicator light for regeneration required lights up, the
system is not in the normal state anymore. The operator has to support
regeneration actively.
• Only use clean diesel fuel according to the fluids and lubricants list.
Types of regeneration
Indicator lights
Type Description
Automatic regeneration
There is no fault in the system
The system carries out automatic regeneration in the background.
There is a fault in the system
The operator has to facilitate regeneration:
• Work with the vehicle. When that is not possible, fold up the joystick
base and run the engine.
Service regeneration May be performed only by an authorized service center.
Letter Indication Description
Regeneration required
• Lights up immediately, when there is a fault in the system
Engine warning
• Lights up immediately, when there is a serious fault in the system
Engine stop
• Lights up immediately, when there is an irreversible error in the
system
To Next Page
Loading...
