Wacker Neuson ET42

4-4 BA E19 en* 1.0 * E19_10_400.fm
4 Putting into operation
Opening/closing the front window
Opening the upper front window
1. Press and hold levers A on the left and right, and pull the front window
forward with handles B on the left and right.
2. Release levers A and press the window upward until it engages.
Closing the upper front window
1. Press levers A on the left and right, and pull the front window
downward with handles B on the left and right.
2. Press the front window fully forward and release levers A.
Fig. 74
Fig. 75
A
B
Fig. 76
A
B