Operation HI 110 / 200 / 300
36 ghi_tx001447gb.fm
4.15 Stopping the Machine
Procedure
Follow the procedure below to stop the machine.
1. Turn the operation mode switch to the OFF (0) position (c).
Shutdown
sequence
The following sequence of events will occur after turning the machine off.
1. The burner will shut down.
2. The blower will stop when the machine is sufficiently cool.
WARNING
Electric shock hazard. Electric power is still active at the blower even when the
machine is turned OFF.
f Remove all electric power to the machine before servicing the machine.
0
To Next Page
Loading...
