Maintenance HI 110 / 200 / 300
48 ghi_tx001450gb.fm
7 Maintenance
7.1 Periodic Maintenance Schedule
Task
Interval*
(hours of service)
Daily 2 Weeks 6 Months Yearly
--- (50) (1000) (1200)
Inspect the heater.
Inspect the hose assembly.
Check fuel level and
pressure.
Clean the machine.
Clean the fuel filter.
Clean the fan and the
interior shell.
Clean and check/adjust
burner electrode settings.
Inspect the heat exchanger.
Inspect electrical
components.
Inspect the blower motor
and belts. Replace the belt
if necessary.
Replace the burner nozzle.
Replace the fuel heater
filter.
Maintain the heater
weldment.
Inspect and test the burner. As needed or upon changing job sites;
see chapter Burner Setup.
Inspect burner electrodes;
replace if necessary.
As needed or upon changing job sites;
see chapter Burner Setup.
*
Use whichever comes first, calendar time or service hours.
To Next Page
Loading...
