Wacker Neuson HI 110HD D

Questions and Answers:

J
Jason TuckerAug 11, 2025
What to do if the burner does not start on my Wacker Neuson HI 110HD D?
- A
  Andrea RussellAug 12, 2025
  If the burner on your Wacker Neuson Heater doesn't start, there are several potential causes. First, ensure that the remote thermostat or thermostat plug is correctly inserted. If that's not the issue, check the cable and power supply for any faults. Also, the over temperature limit might have tripped, in which case you should press the reset button. Finally, the burner could be in lock-out mode; again, press the reset button to resolve this.
Z
Zachary MorrisAug 17, 2025
Why does the Wacker Neuson Heater burner start, but the flame does not ignite and the unit locks out?
- J
  jesse72Aug 17, 2025
  If your Wacker Neuson Heater's burner starts but the flame doesn't ignite and the unit locks out, it could be due to several reasons. Make sure the fuel tank is full. A worn burner nozzle, faulty electrodes, or issues with the Cad cell (detecting external light or being defective) can also cause this problem. Check the Cad cell enclosure and consider replacing the burner nozzle or electrodes. Also, a defective burner control could be the cause, so check the Cad cell enclosure.
E
Erica WardAug 25, 2025
What to do if the burner starts and flame ignites, but the Wacker Neuson HI 110HD D Heater unit locks out?
- B
  benjaminmorenoAug 25, 2025
  If the burner on your Wacker Neuson Heater starts and the flame ignites, but the unit subsequently locks out, consider these possibilities: the fuel pressure may be incorrect, so increase the fuel pressure. A worn burner nozzle could also be the culprit, requiring replacement. Additionally, an incorrect air lock setting or a defective Cad cell or burner control could be the cause. In such cases, re-adjust the air lock setting.
R
Rebecca RobinsonAug 29, 2025
Why is the performance poor when the burner ignites on my Wacker Neuson HI 110HD D Heater?
- A
  Andrea JuarezAug 30, 2025
  If the burner of your Wacker Neuson Heater ignites but the performance is poor, several factors could be responsible. A worn burner nozzle can cause this issue, so consider replacing it. Additionally, a clogged fuel filter can restrict fuel flow, so replace the fuel filter. Air leaks in the fuel lines or insufficient oil pressure can also lead to poor performance; inspect the lines for leaks and replace them if necessary.
S
Stephanie EdwardsSep 4, 2025
How to fix black smoke coming from the vent pipe of my Wacker Neuson HI 110HD D Heater?
- E
  Evan ManningSep 4, 2025
  If you notice black smoke coming from the vent pipe of your Wacker Neuson Heater, it's likely due to insufficient combustion or ventilation air. To resolve this, remove any obstructions from the air inlet and outlet areas to ensure proper airflow.