wc_tx004579en.fm
25
LTS Lifting and Transporting
3.2 Handling and Transport with Crane
1. Ensure that the lifting capacity of the crane and lifting devices are suited to the
weight of the machine to move. The weight is specified in the operator’s manual
and on the data plate.
2. Connect the cable/hook to the lifting eye (a) and tension the cable.
3. Lift the machine about 10 cm (4 in.).
4. Move slowly and position the machine on the ground or on the vehicle.
CAUTION
Handling by crane is allowed only if the machine is connected to the crane through
the lifting eye.
To Next Page
Loading...
