wc_tx004580en.fm
36
Operation LTS
4.7 Output Socket
An optional output socket (a) may be installed on higher power machines so the
generator can run external tools and accessories. If your machine is fitted with this
option, it provides either 110V or 220V output (depending on version/region).
Power is supplied to the socket any time the engine is running and the main circuit
breaker is switched to the ON position.
Do not pull more than 12A from the socket when the lights are on. Otherwise
you will overload the generator and cause the main circuit breaker to trip. Should
the breaker trip, switch off the lights, remove some of the load to the receptacles
and wait 10 minutes for the bulbs to cool before turning them back on.
wc_gr014756
a
To Next Page
Loading...
Need help?
General
