22
Transport RCP
6 Transport
Transporting the machine
The machine must be transported in the carrying case supplied.
1. Pull the plug from the plug receptacle.
2. Close the protective hood (only installed on some machine designs).
3. Place the machine in the carrying case.
4. Wind up the power cable and place in the carrying case.
5. Store both Allen wrenches in the carrying case.
6. Close carrying case.
7. Place the carrying case on or into a suitable means of transport.
8. Secure the carrying case against falling over and down or sliding.
WARNING
Improper handling can result in injury or serious material damage.
f Read and follow all safety instructions of this operator's manual, see chapter
Safety information.
To Next Page
Loading...
