RCP Operation
29
7.4 Decomissioning
Switching off the machine
1. Release ON/OFF switch.
2. Set the pressure release lever in the Release/Idle position.
The knife moves into the original position.
3. Pull the plug from the plug receptacle.
Cleaning the machine
1. Free the cutting head of cutting residues with suitable tools.
2. Wipe the housing with a damp and clean cloth.
CAUTION
Electrical voltage.
Danger of electrocution!
f Make sure when cleaning that no water gets into the machine. Do not clean
machine under running water or with a high pressure cleaner.
To Next Page
Loading...
