Wacker Neuson RCP 20 - Scope of Delivery; Description

44
Accessories RCP
11.2.2 Scope of delivery
11.2.3 Description
Application
The bending head can be installed on a machine with interchangeable head. In
the installed condition the bending head can be used to bend reinforcing steel.
Using the two exchangeable molding pieces, two different bending radii can be
set.
Item Designation
1 Fastening screw
2 Bending head
3 Fastening screw
4 Spring washer
5Nut
6 Movable die
7 Small molding piece
8 Large molding piece