Disassembly and Assembly WM 80 Repair
104 wc_tx000523gb.fm
10 Disassembly and Assembly
10.1 Tools
Because all possible problems encountered while repairing the
machine cannot be anticipated, it is up to the mechanic to use common
sense and good judgement in tool selection.
The use of any special tools is recommended only for those operations
where the use of conventional tools proves inadequate.
Before substituting another tool or procedure, you should be satisfied
that neither personal injury nor damage to the component will result.
10.2 Special Tools
The following list of special tools will be needed when disassembling
and assembling the machine.
Tool Part Number Tool Part Number
Bearing extractor 0013288 Flywheel puller 0046503
Holding ring 0013290 Pusher tube
(Seal and bearing
installer)
0048585
Split shell puller 0017328 4-shoe clutch puller
(BHF 30S, BS 45Y,
BS 50Y, BS 52Y,
BS 60Y)
0049776
Crankshaft support tube 0023339 2-shoe clutch puller 0117972
Ring compressor 0031986 Clutch puller (BS 62Y,
BS 65Y)
0045064
Crankshaft support plate 0032028 Vacuum test kit 0155268
Split ring puller 0023338 Pressure tester gauge 0079264
To Next Page
Loading...
Need help?
General
