Wacker Neuson WM 80 User Manual

Disassembly and Assembly WM 80 Repair
110 wc_tx000523gb.fm
10.8 Removing Engine From BH 23 Breakers
See Graphic: wc_gr002937
Removal:
10.8.1 Stop the machine and allow it to cool.
10.8.2 Remove the screws (a) and lock washers which secure the two shells
together.
10.8.3 Remove the shell (b) opposite the throttle.
10.8.4 Remove the cover of the air cleaner, the air filter (c), and the base of
the air cleaner (d).
10.8.5 Remove the carburetor (e).
10.8.6 Remove the three socket head cap screws (f) that hold the engine to
the crankcase and remove the engine.
Installation:
10.8.7 Position the engine onto the machine and secure it with three socket
head cap screws (f).
10.8.8 Install the carburetor (e).
10.8.9 Install the base of the air cleaner (d), the air filter (c), and the cover of
the air cleaner.
10.8.10 Secure the two shells to the machine with screws (a) and lock
washers.

Wacker Neuson WM 80 Specifications

General

Brand	Wacker Neuson
Model	WM 80
Category	Engine
Language	English