WM 80 Repair Disassembly and Assembly
wc_tx000523gb.fm 107
Installation
Perform the procedure below to install the engine.
10.6.6 Install the engine (d) to the machine with three screws. Torque the
screws to 28 Nm (20 ft.lbs.).
10.6.7 Reconnect the wiring (c) to the switches.
10.6.8 Install the bracket (b).
10.6.9 Install the muffler (a). Torque screws (x) to 18 Nm (13 ft.lbs.). Torque
screw
(y) to 23 Nm (16 ft.lbs.).
10.6.10 Install the carburetor.
Result
The engine has now been installed.
To Next Page
Loading...
