4
EPG-SPRINT XE
OPERATING MANUAL
VERSION 09/2017 ORDER NUMBER DOC2354913
7 OPERATION 34
7.1 Training the Operating Sta 34
7.2 Safety Instructions 34
7.3 Preparations for Commissioning 36
7.3.1 Operating Modes 36
7.3.2 Gun Recognition 36
7.3.3 Manual Gun Mode with External Control 37
7.3.4 Basic and Factory Settings 37
7.4 Recipes 38
7.4.1 "Double Click" Recipe (High Dynamic Remote) 39
7.5 Air High Output Mode (High Powder Output) 40
7.5.1 Combining the Air Outputs 40
7.5.2 Activating High Output Mode (C17) 41
7.6 Changing and Saving Recipes 44
7.6.1 Recipe No. 1-4 44
7.6.2 Recipe No. 5-50 45
7.7 Setting and Changing Coating Parameters 46
7.7.1 Setting the Total Air Volume 46
7.7.2 Setting the Powder Feed Quantity 47
7.7.3 Setting the Additional Air (Atomizing/Ionizing/Tribo Air Volume) 48
7.7.4 Setting the High Voltage 49
7.7.5 Display of Actual High-voltage Value 50
7.7.6 Setting the Current Limitation 51
7.7.7 Displaying Actual Value of Current Limitation 52
7.7.8 Setting the U/I Characteristic Curves 53
7.8 Flush function 55
7.8.1 Hose Flush Function 55
7.8.2 Cleaning Flush Function 55
7.8.3 Procedure for Cleaning Flushing with Manual Guns 56
7.8.4 Procedure for Cleaning Flushing with Automatic Guns 57
7.9 Starting Output Setting (Zero Adjustment) 58
8 CLEANING AND MAINTENANCE 60
8.1 Cleaning 60
8.1.1 Cleaning Sta 60
8.1.2 Safety Instructions 60
8.1.3 Cleaning Procedures 61
8.2 Maintenance 62
8.2.1 Maintenance Sta 62
8.2.2 Safety Instructions 62
8.2.3 Maintenance Procedures 63
9 INSPECTIONS 64
9.1 Inspections in Accordance with DIN EN 50177: 2010 64
9.2 Inspections in Accordance with DIN EN 50050-2: 2014 68
10 DISASSEMBLY AND DISPOSAL 70
10.1 Disassembly 70
10.2 Disposal 71
11 TROUBLE SHOOTING AND RECTIFICATION 72
11.1 Warnings E01-E04 73
11.2 Faults 75
To Next Page
Loading...
Need help?
General
