WAGNER EPG-SPRINT XE User Manual

9
EPG-SPRINT XE
OPERATING MANUAL
VERSION 09/2017 ORDER NUMBER DOC2354913
2 CORRECT USE
2.1 DEVICE TYPE
Universal control unit for controlling electrostatic manual and automatic spray guns
2.2 TYPE OF USE
The EPG-SPRINT XE control unit is intended for controlling electrostatic manual and
automatic spray guns of type A-P (2 mJ) according to DIN EN 50177.
Incorrect use!
Risk of injury and damage to the device.
Only connect original WAGNER spray guns to the EPG-SPRINTXE
control unit.
The PEM-C3R and PEM-T3R manual spray guns cannot be
connected to the EPG-SPRINT XE control unit.
WARNING
2.3 USE IN AN EXPLOSION HAZARD AREA
The EPG-SPRINT XE control unit is intended for use with powder spray guns of types A-P up
to 2 mJ in accordance with the prototype test PTB 12 ATEX 5001.
The EPG-SPRINT XE control unit may be used in the dust explosion zone (Zone 22) under
the following conditions:
– Control unit correctly tted in rack.
– Rack correctly and securely sealed on rear with associated cover.
– All connections not needed (mains output, remote control) are sealed with dust
protection caps.

WAGNER EPG-SPRINT XE Specifications

General

Brand	WAGNER
Model	EPG-SPRINT XE
Category	Paint Sprayer
Language	English