WAGNER Leopard 35-150 - Page 71

Operating manual Piston pump IceBreaker 40-200 ccm (Finishing)
13 Accessories
Order number 2333538 | Edition 03/2021 71
Pos K Order no. Designation
Wildcat
10-70 **
Wildcat
18-40
Puma
28-40
Puma
21-110
A 2329460
2337529
2329456 2329467 2329517 Piston pump PE/TG
A 2329462
2337530
2329458 2329469 2330614 Piston pump PE/T
1 2332169 -- Hopper set, 5 l for piston pump
2 2323225 -- Suction elbow for hopper SSt
3 ♦ 2324110 Suction hose, DN16-SSt, complete
4 ♦ 2324116 Suction hose, DN25-SSt, complete
5 2325408 LP hose-fitting DN25-M36-SSt
6* ♦ 2323474 LP hose, DN25-PN10-EPDM (per meter)
7* ♦ 2323595 LP hose DN25-PN10-PE (per meter)
8 2325390 LP hose-fitting DN16-M36-SSt
9* ♦ 2323329 LP hose, DN16-PN10-EPDM (per meter)
10* ♦ 2323597 LP hose DN16-PN10-PE (per meter)
11 2324158 -- Suction tube DN16-SSt, complete
12 2323239 Suction tube DN25-SSt, complete
13 2324247 Suction elbow, DN25-SSt
14 2324238 Suction tube DN25-200L-SSt, complete
15 2315163 Bung adapter DN25-G2"
16 2324241 Suction tube DN25-30L-SSt, complete
17 ♦ 2323396 Suction filter, DN16-18 mesh-SSt
18 ♦ 2323325 Suction filter, DN25-18mesh-SSt
19 2329688 2329689 -- Inlet valve with valve depressor
For details, see chapter Inlet Valve with Valve De-
pressor [8108]
♦ = wearing parts
-- = Item not available as a spare part
/ = Item does not exist
* Pos 6, 7, 9, 10: max. 10 bar:
If a feed pump (>10 bar) is used, do not use downstream of the feed pump.
** The accessories listed for the product input are not suitable for the Wildcat 10-70 TC
1.4404.