WAGNER PEM-X1 CG - Inspections in Accordance with DIN en 50050-2: 2013; Abbreviations

Operating manual Powder Cup Gun PEM-X1 CG
10 Inspections in Accordance with DIN EN 50050-2: 2013
Order number 2326960 | Edition 10/2022 45
10 INSPECTIONS IN ACCORDANCE WITH DIN EN 50050-2: 2013
If the system is used for electrostatic coating with ignitable coating powders, the test must
be
performed in accordance with DINEN50050-2: 2013 according to the following Overview Table
[846].
10.1 ABBREVIATIONS
ER Employer FT Function test
SP Skilled person ME Measurement
FPE Fire protection engineer SI Standard inspection
QEW Electrician VI Visual inspection
MFR Manufacturer CM Continuous monitoring
TP Trained person TI Technical inspection