English
20
Long Term
Storage
Start
You will need:
• Multi-Purpose Oil
• Rags
IMPORTANT: Store the
unit indoors with the
power cord wrapped
around the handle.
1. Carefully tilt the sprayer on
its back.
Squeeze the ears (a) on
the suction tube clip and
slide out of the inlet tting.
5. Turn power OFF. 4. Cover the outlet valve with a rag.
Turn power ON and let the pump
run for ve seconds.
2. Remove the suction tube.
Using a wrench, remove
the spray hose.
6. Replace suction tube. Insert
suction tube into the inlet valve
housing and secure with the
suction tube clip (b).
3. Careully tilt the sprayer upside-down.
Squirt approximately 2 ounces of Multi-
Purpose Oil into the inlet tting.
7. Wipe entire unit, hose,
and spray gun to remove
accumulated spray material.
To Next Page
Loading...
Need help?
General
