1.
Camera
2.
Lighting Lamp x2
3.
Landing gear x4
4.
Clockwise motor (levogyrate thread
is counterclockwise)
7j2=50
Quick Start Guide
1.0 Get to know your aircraft
•
The RUNNER 250 body is created using CFP for outstanding crash survivability.
•
Modem industrial and modular design, improves the product performance and permit easy
maintainance and upgrades.
•
Advanced 5.8ghz live video and OSD system, for a unforgettable visual FPV experience.
•
Equip with dual GPS module, the RUNNER 250 advance can realize GPS hold mode, Circle Flight,
Hyper IOC and one key retum to home.
5.
Counterclockwise motor
(dextrogyrate thread is clockwise)
6.
Clockwise propeller
7.
Counterclockwise propeller
8.
GPS
9.
SBUS/PPM connection port
10.
5V power output port
11.
FCS-250 Main Controller
12.
Battery: 11.1V 2200mAh 25C 3S Li-Po
13.
Transmitter code switch
14.
Mushroom antenna
15.
DUAL reciever antennas
for best performance
* always extend before flying
16.
Red LED light x2
17.
Turn indicator light x4
18.
OSD code switch:
ON
O
D
Slide the code switch 1° to °ON" to start the OSD
* To avoid property loss and personal injury caused by wrong operation, please read the manual carefully and
watch the tutorial videos at www.walkera.com
before flight.
-3-
To Next Page
Loading...
