Wallbox Commander 2 - Product Description

5
Important information for the correct disposal of the product in accordance with Directive 2012/19/EC.
At the end of its useful life, the product will not be disposed of as urban waste. It must be taken to
a collection center for special and dierentiated waste or to a distributor that provides this service.
Connector Recommendations
• Always check the charging cable and the contacts for damage and contamination before use.
• Never use a damaged charging cable, the vehicle plug, or the infrastructure electrical outlet to charge.
• Never use contacts that are dirty or wet.
• Only connect the connector to vehicle plug and infrastructure electrical outlets that are protected
against water, moisture and liquids.
• After stopping the charging process, the vehicle connector and the equipment plug can be
disconnected. Never use force to disconnect the vehicle connector from the inlet or the equipment
plug power outlet. Such dangerous activity can cause serious injuries or even death.
• Depending on the charging station and the electric vehicle, the time to complete the charging process
and the duration of unlocking may vary.
• Some vehicles can be started with the charging cable connected. Be sure to unplug before driving o.
• Do not use the charging cable with an extension cable or an adapter.
• If the connector emits smoke or begins to melt, never touch the charging cable. If possible, stop the
charging process. In any event, disconnect the power supply from the Wallbox device.
• Keep the charging cable out of the reach of children.
• Be careful with the connector, do not step on it or on the cable.
• The cable should NOT be tightened under ANY CIRCUMSTANCES while connected to the vehicle.
Product Description
Introduction
Wallbox Commander 2 is an advanced, intelligent charging system for plug-in vehicles, designed for semi
public and business charging locations. It is a new and improved second generation design, ncorporating
internal DC leakage protection. Which make installation easier and more economical.
The charger connects with the myWallbox management platform, which makes it smart and enables multiple
user access with a simple PIN code, RFID card or Wallbox mobile app. The touchscreen is engaging, practical
and easy to navigate. It can be customised to reflect individual preferences and can display company
messages and logos.