To Next PageTo Next Page
Need help?Do you have a question about the Walther Systemtechnik SMS-22 and is the answer not in the manual?
Identifies the intended audience for the manual.
Explains the warning symbols and their meanings used in the document.
Provides an overview of the device's safety aspects and quality.
Details potential hazards from residual energy sources within the device.
Outlines the terms and conditions for warranty coverage and manufacturer liability.
Specifies the intended applications and operational parameters for the device.
Lists actions and conditions that constitute improper use of the device, potentially causing damage.
Defines the required training and expertise for personnel operating or maintaining the device.
Describes the packaging standards and regulations applicable for shipping the device.
Lists essential preparatory steps to be performed before transporting the device.
Explains the primary function and application of the SMS-22 spray valve.
Provides key specifications, dimensions, pressures, and operating parameters for the device.
Details the location and information found on the device's identification label.
Illustrates the connection points and procedures for attaching hoses to the spray valve.
Presents an exploded view of the spray valve with numbered components and their descriptions.
Shows the electrical schematic for connecting the spray valve to a control unit.
Explains how to adjust the material flow rate using the regulating screw.
General guidelines for safe and effective operation of the spray valve.
Details the procedures and conditions for operating the spray valve safely.
Identifies and describes the function of the device's operating controls.
Procedures for handling brief periods when the device is not in use.
Steps for safely taking the device out of service for extended periods.
Instructions for properly shutting down the machine or device.
Overview of maintenance principles and recommendations for long-term valve life.
Instructions and precautions for cleaning the spray valve and its components.
Step-by-step guide for replacing the nozzle and needle assembly.
Procedure for removing and replacing the sealing screw on the spray valve.
Detailed steps for replacing the sealing elements within the sealing screw.
Information on ordering and using original spare parts for the device.
Contact information and procedures for obtaining technical support or service.
Initial checks and general advice for resolving issues with the spray valve.
A table detailing common malfunctions, their possible causes, and recommended actions.
Visual guide to identifying and rectifying common spray pattern defects.
Technical drawing showing the overall dimensions and key measurements of the SMS-22 valve.
An illustrated diagram showing the individual components of the SMS-22 with part numbers.
A comprehensive list of standard spare parts with article numbers, quantities, and descriptions.
Lists article numbers and descriptions for various types of air caps available for the spray valve.
Provides a list of article numbers and descriptions for different nozzle types and sizes.
Lists article numbers and descriptions for various nozzle needles compatible with the spray valve.
Details the contents and article number for wear-and-tear spare parts kits.
Lists various accessories available for the spray valve, with article numbers and descriptions.
Technical drawing and information related to the center hole for a specific centering sleeve.
Information and diagrams for optional add-on components like pressure sensors and heating plates.
General| Brand | Walther Systemtechnik |
|---|---|
| Model | SMS-22 |
| Category | Control Unit |
| Language | English |
