Assembly Instructions - Spray Valve SMS-22
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
10.1.2 Spare Part List for SMS-22 (Standard)
Main body SMS-22, 77 x 35 x 22mm, complete
Main body SMS-22, 77 x 35 x 22mm, complete with top hole 1/8"
Main body SMS-22, 77 x 35 x 22mm, complete with top hole 1/8" and
centering holes on the side
97640102
97640021
97640101
97640004
Material sealing kit
Plastic protective sleeve, ø10 x 6mm
Variseal 2,65 x 2,0 x 2,8
O-ring / Viton®
Sealing screw, complete, 11 x 21mm, Viton®
O-ring / Viton®
Sealing screw, complete, 3 x 72,5mm
O-ring / Viton®
O-ring / Viton® (LABS-free)
8.0
8.1
8.2
8.3
8.4
8.5
8.6
8.7
97900004
97610092
97220092
97640043
97930000
97820020
97640005
97710005
Raster needle lock, complete
Needle stroke-raster button ø15 x 29,5mm
Raster screw plug SW17 x 37mm
O-ring / Viton®
Thrust ring, 14,5 x 3mm
Pressure spring 1.1 x 22mm
O-ring / Viton® (LABS-free)
Closing piston
Control air connection for ext. controlling, 15 x 15mm
O-ring / Viton®
Cylinder screw DIN 7985 M3 x 18, black
Straight screw-in screw joint 1/8" - 6/4 KU
L-push-in fitting 1/8", 6/4
Screw joint, complete, 1/8" SW 8 x 19mm
Elbow gland pivoted, M5, VA
* Article numbers can be found on the following pages. All air caps, nozzles and nozzle needles are also
available in other materials upon request.
Please indicate the required size when ordering spare parts for nozzle sets (nozzle needle, nozzle and air
cap). Nozzle sets should always be replaced as a whole!
IMPORTANT
Always indicate the inscribed serial numbers when ordering spare parts!