Walther Systemtechnik SMS-22 - Operating Elements; Taking out of Service; Short Interruption; Long-term Interruption

Rev. 1.3
Assembly Instructions - Spray Valve SMS-22
Page 11 of 25
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
6.3 Operating Elements
7 Taking out of Service
7.1 Short Interruption
A short interruption (15 min and more) will always be followed by a clean-spraying.
NOTE
Please follow the operating instructions!
7.2 Long-term Interruption
The following will be observed for a long-term interruption of the device/machine:
 Depressurize material supply lines
 Take air cap (2.1/2.2) off and clean nozzle (3) with a special thinner and a soft cloth. Make sure that no
cloth fibers are left on the nozzle tip.
NOTE
Please follow the maintenance instructions!
7.3 Shutdown of Device
The following is important for a shutdown of the machine / device:
 Clean spray valve with a special thinner.
NOTE
Please follow the maintenance instructions!
Regulating Screw