WAMGROUP MBF - 4.0 Information Regarding Handling and Transport; 4.1 Type of Packaging

4.0 INFORMATION REGARDING HANDLING
AND TRANSPORT
VL
2
VAL.130.--.M.EN Issue: A1
09.16
16
The type of packaging is selected according to the type of valve supplied, the transport means used, the quan-
tity of goods shipped and the destination.
To facilitate shipment, the valves may be divided into separate packages that are suitably protected. Nuts and
bolts and gaskets necessary for the correct assembly are not included and supplied together with the valves.
7KHSDFNDJHVFDQEHORDGHGVHSDUDWHO\RQWKHYHKLFOHRU¿[HGWRDSDOOHWSURWHFWHGSURSHUO\RULQVLGHDFRQ-
tainer for shipment to a far destination or for sea or air transportation.
The signs for safe lifting and handling are shown on all the packages.
The list bellow provides the description and symbols envisaged on the packaging.
The packaging material has to be disposed off or recycled in compliance with the standards in force.
The data given below do not include any additional packaging (such as pallets or similar).
A) Fragile: indicates that the package must be handled and lifted carefully to avoid
damage.
B) Centre of gravity: indicates the position of the centre of gravity of the package.
C) Harness: indicates the correct position of the harness for lifting the package.
D) Stacking limit: indicates the maximum stacking load of the packages.
E) Weight: indicates the maximum weight of the package.
Kg
4.1 Type of packaging