7.0 INFORMATION REGARDING MAINTENANCE
VL
2
VAL.130.--.M.EN Issue: A1
09.16
40
Danger - Warning
Before carrying out any maintenance operation, activate all the safety devices for the safety of the
persons involved in the operations and those nearby.
Set the valve concerned in safety condition.
Wear suitable personal protection devices; in this regard, consult the person in charge of safety of
production activities.
Important
Failure to strictly follow the instructions can cause problems and invalidate the warranty on the valves
supplied.
- Scheduled maintenance Table
Component
Operation to be
carried out
Daily Weekly
Every
month
Every
six
months
Every
two
years
Manual
reference
Safety device Performance check
Valve
Remove dust residue from
the outer surface
Valve outlet
Check if the outlet is free of
material residues. Other-
wise, clean it thoroughly to
remove all obstructions that
EORFNWKHPDWHULDOÀRZ
Earthing connection
Integrity of electrical con-
nection
Seal Check the wear
Bushes Check the wear
Flanges 9HULI\¿[LQJ
Actuator coupling Check and remove any rust
Seal Replace
Actuator bracket Check condition
Safety and information signs Check the condition and
legibility
Important
Part replacement depends on the use of the valve and type of material handled.
To Next Page
Loading...
