Wansview Q1 - Alarm Setting; Motion Detection; Audio Detection

5.3.3 Alarm Setting
In the Alarm Setting, use can set up the Alarm alert.
5.3.3.1 Motion Detection
User can set up motion
detection area here to narrow
the motion detected area to
some important places, tick
each window, move your mouse
to the lower right corner and
drag it can adjust the size of the
window, and can move it to the
needed area.
User can choose the sensitivity
from low, middle and high. The
high sensitivity will be easy to
get alarm.
I/O Detection and
Temperature Detection are
disabled in this model.
5.3.3.2 Audio Detection
www.wansview.com 43