warema_2035145_alhb_en_v2•2021-04-01 We reserve the right to make technical modifications
11
The time switch in the WMS WebControl pro is also called a "central time
switch". The switching times specified here are relayed to the receivers as
move commands.
For additional information, see also Chapter 8.3.5 auf Seite 28.
If you decide to use the central time switch, the time switch commands
parameterised in the receivers will be deactivated.
The control timer for activating and deactivating control functions is still
managed decentrally in the receivers.
3.3 Parameterising settings
The basic settings for the WMS WebControl pro are made here.
Using the WMS WebControl as a system clock
Use of the central time switch
Geographical data on the location
(this is required if the WMS WebControl is to execute actions depending on
sunrise and sunset)
Commissioning
To Next Page
Loading...
